Shipping class: Large

Large Items (Modems and Meters)

Clock Display with 1 inch 7 Segment LEDs

Clock Display with 1 inch 7 Segment LEDs

1 inch tall seven segment LED elements.
BNC input 20mA current loop (RS232 available with external adaptor cable).
12 volt operation/ 4pin XLR connector.

Displays the following Scoreboard clocks or Speed Guns;

OES (9.6kBaud)
WhiteWay (9.6kBaud)
Daktronics DSTI (9.6kBaud ESPN Format)
Daktronics DSTI (9.6kBaud FOX Format)
Display Solutions (9.6kBaud)
Daktronics RTD (19.2kBaud)
Jugs Speed Gun (1.2kBaud)
Stalker Pro Speed Gun (9.6kBaud)
Stalker Sport Speed Gun (1.2kBaud)
Pitch F/X Speed Data (9.6kBaud)

DKO Modem

Dramatically increases data cable length from a standard RS232 source.

  • Tissot – 115200 Baud – 300 meters
  • Daktronics RTD – 19200 Baud – 600 meters
  • OES, DAK DSTI, Fairplay, Stalker Pro, etc, – 9600 Baud – 1000 meters
  • Jugs Gun, Stalker Sport – 1200 Baud – 1000 meters

*Note: The above specifications are valid for Belden 1694A 16.2pF/Ft or CAT5 15pF/Ft. Expect a reduction in distance with higher capacitance cable. Actual distances may vary depending on the cable you use.

The DKO Modem receiver works by treating a standard RS232 signal as a current loop. Instead of detecting the RS232 alternating voltage it detects the alternating current.  The resulting effect is an increase in reliable data cable lengths without the need to convert the RS232 data at the source.  It will also receive 20mA current loop data transmissions.

Features:

  • Front Panel Switches; NULL (DTE/DCE), Mode (RS232/C.L.) & Polarity (+/-)
  • Front Panel Indicators; Power LED, Data presence LED
  • Front panel Outputs; 2 DB9 female RS232
  • Rear Panel Input Connectors; DB9 Male, DB9 Female, BNC & Binding Posts
  • Rear Panel Power Supply Input; 4XLRM 12VDC 300mA (pin 4 +, pin 1 gnd)
  • Input Overload Protection; Max input voltage = 60VDC
  • Enclosure; 5” X 6” X 1 5/8”, ABS Plastic housing, Fiberglas end panels
  • 3 year warranty

Ground shipping only

Questions: email [email protected]

Isolated RS232 Distribution Amplifier with confidence display

Isolated RS232 Distribution Amplifier with confidence display

1 RU 19 inch rackmount.
Mechanical isolated 9 pin D-sub connectors.
Optically isolated RS232 input.
Six galvonically and optically isolated RS232 outputs.
20mA current loop data output (BNC Connector).
12 Volt operation/ 4pin XLR connector.
Seven segment LED clock/speed display.
Front panel scoreboard/speed gun display selector switch.

Front panel LED readout displays the following Scoreboards and Speed guns:

OES (9.6kBaud)
WhiteWay (9.6kBaud)
Daktronics DSTI (9.6kBaud ESPN Format)
Daktronics DSTI (9.6kBaud FOX Format)
Display Solutions (9.6kBaud)
Daktronics RTD (19.2kBaud)
Jugs Speed Gun (1.2kBaud)
Stalker Pro Speed Gun (9.6kBaud)
Stalker Sport Speed Gun (1.2kBaud)
Pitch F/X Speed Data (9.6kBaud

RS232 Clock and Speed Data Meter

Features:

  • LCD Backlit/Transflective Display viewable from total darkness to direct sunlight
  • Field upgradeable firmware.
  • Port Powered serial port for RS422 converter to interface with Tissot.
  • Auto shut-off.
  • On-screen battery capacity meter.
  • Runs on one 9 volt battery.
  • Room for future upgrades

Ground shipping only

Questions: email [email protected]